Dezhou Deqian HVAC Equipment Co., Ltd.

Vertical Side-Blow Centrifugal Air Curtain
PRODUCT PARAMETERS
Vertical side-blow design: The vertical side-blow structure offers a flexible layout, adapting to the installation needs of different premises.
Double-inlet centrifugal fan: A double-inlet centrifugal fan provides the air supply power, giving the equipment stable air delivery capacity.
Flexible heat source: Hot water or steam is used as the heat source, with the internal heater heating the air to form a hot air curtain.
Uniform air supply: The outlet air speed is uniform, with a stable air supply effect.
Low installation height: A lower installation height requirement makes it suitable for premises with limited installation space.
Compact structure: Small equipment size with a rational design, easy to install and arrange.
Easy maintenance: Simple installation and convenient repair, easy for daily inspection and maintenance.
Description
The vertical side-blow centrifugal air curtain is an air treatment device using hot water or steam as the heat source. Powered by a double-inlet centrifugal fan, air is drawn into the unit and pressurized, then heated by the internal heater, and finally hot air is supplied from the air outlet to form a hot air curtain.
With a vertical side-blow structure design, the product features uniform outlet air speed, low installation height, small equipment size, simple installation and easy maintenance. Using hot water or steam for air heating, it is suitable for premises with hot water or steam heat sources, meeting the air heating and air barrier needs of different environments.
Applications
- Large industrial plants and production workshops
- Warehouses and logistics centers
- Large commercial buildings
- Shopping malls and shopping centers
- Hotels and public buildings
- Production premises with hot water or steam heat sources
- Other places requiring hot air curtains and air barriers
Product Advantages
The vertical side-blow centrifugal air curtain combines a double-inlet centrifugal fan with hot water or steam heating, uniformly delivering hot air from the outlet through internal pressurization and heating to form a hot air curtain. With uniform air supply, low installation height and small size, the product meets the air heating and air barrier needs of different premises.
The vertical side-blow structure occupies little space, with simple installation and convenient maintenance. It can also utilize existing hot water or steam heat sources, providing a practical hot air curtain solution for industrial plants, warehouses and various public buildings.
Supplementary Details
Installation, Use and Maintenance Instructions for the Vertical Side-Blow Centrifugal Air Curtain
- Before installation, channel steel or I-beam should be embedded in the walls on both sides of the door as pre-embedded parts. During installation, a suitable section steel can be selected as the crossbeam, and the unit can be fixed to the beam frame with bolts.
- When multiple units are used, the piping should be connected in parallel. When supplying hot water, the lower pipe is the water inlet and the upper pipe is the water outlet.
- The hot water for heating should preferably be softened to prevent scaling.
- After installation, the unit should first be test-run; check whether the fan motor wiring is correct and reliable to avoid short circuits burning the motor, and pay attention to whether the impeller rotation direction is correct.
- During normal use of the unit, start the fan first and then supply heat, so as to ensure the service life of the fan. Operating with heat supply but without starting the fan is not allowed. When the unit is out of use in winter or during installation and commissioning, the water in the heater should be drained or other antifreeze measures taken to prevent the heater from freezing and cracking. When the ambient temperature is below 0 degrees C, the water system must not stop heat supply.
- For aesthetics or noise reduction, the unit can be enclosed with decorative panels; air inlets should be left, and soft foam plastic should be pasted inside the decorative panels.
- When steam is used for heating, the steam supply pressure must not exceed 6 kg/cm2; the steam inlet/outlet direction is opposite to the water supply, and a steam trap is required.
- A comprehensive inspection of the unit should be carried out every year: add or replace the grease in the fan motor bearings and clean the heater.
FAQs
We are a manufacturer of ventilation, air-conditioning, dust-removal and smoke-exhaust equipment. Our range covers fire smoke-exhaust fans, fire dampers and smoke-exhaust valves, aluminium air outlets and diffusers, ventilation ductwork and silencers, air-handling and fresh-air units, water tanks, cooling towers, seismic supports, and air-purification and kitchen oil-fume purification equipment.
Yes. Our fire dampers, smoke-exhaust fire dampers, smoke-exhaust valves and fire smoke-exhaust fans carry CCCF (3C) certification. For every fire-protection product we can supply national-level fire test reports together with the complete CCCF documentation package.
The company is certified to ISO 9001 (quality), ISO 14001 (environmental) and ISO 45001 (occupational health and safety) management systems, and holds AAA-grade certificates as a quality-assured, contract-honouring enterprise.
Our fan series includes CCCF axial fire smoke-exhaust fans, CCCF centrifugal fan boxes for fire service, pressurization supply fans, diagonal-flow fans, mixed-flow fans, axial fans, ceiling-mounted and floor-standing fresh-air ventilators, heat-recovery units, and finned-tube, rotary-wheel and heat-pipe air-handling units.
Dampers: CCCF automatic fire dampers, CCCF automatic smoke-exhaust fire dampers, CCCF automatic smoke-exhaust valves, manual balancing dampers, non-return dampers, pressurization supply outlets, multi-blade outlets, and CCCF smoke-exhaust outlets. Aluminium outlets: spherical jet nozzles, swirl diffusers, ceiling diffusers, weatherproof louvers, and single/double-deflection louvers.








