Dezhou Deqian HVAC Equipment Co., Ltd.

RFM Centrifugal Hot Air Curtain
PRODUCT PARAMETERS
Before installation, channel steel or I-beam should be embedded in the walls on both sides of the door as pre-embedded parts. During installation, a suitable section steel can be selected as the crossbeam, and the unit can be fixed to the beam frame with bolts.When multiple units are used, the piping should be connected in parallel. When supplying hot water, the lower pipe is the water inlet and the upper pipe is the water outlet.The hot water for heating should preferably be softened to prevent scaling.After installation, the unit should first be test-run; check whether the fan motor wiring is correct and reliable to avoid short circuits burning the motor, and pay attention to whether the impeller rotation direction is correct.During normal use of the unit, start the fan first and then supply heat, so as to ensure the service life of the fan. Operating with heat supply but without starting the fan is not allowed. When the unit is out of use in winter or during installation and commissioning, the water in the heater should be drained or other antifreeze measures taken to prevent the heater from freezing and cracking. When the ambient temperature is below 0 degrees C, the water system must not stop heat supply.For aesthetics or noise reduction, the unit can be enclosed with decorative panels; air inlets should be left, and soft foam plastic should be pasted inside the decorative panels.When steam is used for heating, the steam supply pressure must not exceed 6 kg/cm2; the steam inlet/outlet direction is opposite to the water supply, and a steam trap is required.A comprehensive inspection of the unit should be carried out every year: add or replace the grease in the fan motor bearings and clean the heater.
Description
This type of hot air curtain adopts an external-rotor centrifugal fan dedicated to air conditioning, with high air pressure, low noise and long service life. For a water supply temperature of 60-80 degrees C, the air heater adopts high-purity seamless copper tubes with corrugated aluminum fins, which are corrosion-resistant with stable heat transfer. When the heating medium is hot water above 80 degrees C or steam, the heater adopts seamless steel pipes or high-frequency welded pipes with aluminum fins, with strong resistance to steam impact, good heat dissipation, sturdiness and durability. The concealed casing is painted; the exposed casing can be painted or electrostatically powder-coated, with various colors for users to choose; a brushed stainless steel casing is also available for a luxurious look. It is suitable for shopping malls, office buildings, hotels, restaurants, workshops, underground garages and other places.
[Product Advantages]
Economical operation and low maintenance cost; while sealing the doorway, it can supplement indoor heat. According to the structural form, it can be divided into vertical (L) and horizontal (W) types.
[Selection]
When the distance from the upper frame of the door to the ceiling is more than 1.1 m, the vertical type can be selected; when the distance is between 0.6 and 1.1 m, the horizontal type can be selected.
FAQs
We are a manufacturer of ventilation, air-conditioning, dust-removal and smoke-exhaust equipment. Our range covers fire smoke-exhaust fans, fire dampers and smoke-exhaust valves, aluminium air outlets and diffusers, ventilation ductwork and silencers, air-handling and fresh-air units, water tanks, cooling towers, seismic supports, and air-purification and kitchen oil-fume purification equipment.
Yes. Our fire dampers, smoke-exhaust fire dampers, smoke-exhaust valves and fire smoke-exhaust fans carry CCCF (3C) certification. For every fire-protection product we can supply national-level fire test reports together with the complete CCCF documentation package.
The company is certified to ISO 9001 (quality), ISO 14001 (environmental) and ISO 45001 (occupational health and safety) management systems, and holds AAA-grade certificates as a quality-assured, contract-honouring enterprise.
Our fan series includes CCCF axial fire smoke-exhaust fans, CCCF centrifugal fan boxes for fire service, pressurization supply fans, diagonal-flow fans, mixed-flow fans, axial fans, ceiling-mounted and floor-standing fresh-air ventilators, heat-recovery units, and finned-tube, rotary-wheel and heat-pipe air-handling units.
Dampers: CCCF automatic fire dampers, CCCF automatic smoke-exhaust fire dampers, CCCF automatic smoke-exhaust valves, manual balancing dampers, non-return dampers, pressurization supply outlets, multi-blade outlets, and CCCF smoke-exhaust outlets. Aluminium outlets: spherical jet nozzles, swirl diffusers, ceiling diffusers, weatherproof louvers, and single/double-deflection louvers.








